Anea body scanner 3D | Anea 3D
Fully automatic non-invasive body scanner.
What hardware does Anea scanner consist of?
Sensor Tower
The sensor tower is made of a body made of ABS, has a high-resolution 3D camera that is used to photograph the body in the form of three. The sensor tower weighs approximately 5 kg and is 120 cm high. The sensor used in the tower is Microsoft Kinect v2.0, which provides an accuracy of 5 mm for our measurements. At the top of the tower is a colored headlight ring that notifies you of various system states.
- Sensor tower
- (white ABS, light weight and high stability)
- Head width: 13.5 cm
- Bottom width: 27 cm
- Height: 120 cm
Scan Platform
The scanning platform rotates the body as it collects information so that the sensor can see the body from all angles. The scanning platform communicates with the tower and the computer via wireless connection (WIFI). The platform weighs approximately 17 kg and is 12 cm high. It has 6 Load Cell bases installed under the platform and provides an accuracy of 25 grams for weighing. The rotation speed of the platform is 1 rpm in 45 seconds
- Platform
- (white coated extruded aluminum, high pressure resistance)
- Height: 12cm
- Width: 64cm
- Length: 64 cm
What technologies are used in Anea scanner?
Scanning platform status display: 1 x LED RGB
Scanning tower: x20 x LED Ring RGB to display all scanning steps and device status and alerts
connections
Sensor tower connection to the platform: via Wifi
Platform connection with computer: via Wifi
Sensor tower connection to computer: via USB 3.0 cable (Type A to Type B) 1.5 meters long
power of platform and tower: 220V-AC, 0.1A
Sensors
Camera sensor: Microsoft Kinect V2
Weighing sensor: Equipped with balance weighing technology with an accuracy of 50 grams (10-200 kg)
Hall Efect sensor: To determine the position of the platform
How is 3D scanning performed?
It only takes 45 seconds to stand on the 3D scanner platform of Anea’s body to take about 700 depth images from all directions of the body, the aggregation of these images forms a 360-degree 3D model of the body.
This three-dimensional model will then be analyzed using image processing algorithms, anthropometric science (body measurement) as well as mathematical methods, and the body condition report will be visible.
Perfect space to launch Anea scanner
Space Requirements
Distance between tower and platform: 120 cm
Distance of the platform from the back wall: 90 cm
Distance of the platform from the sides: 80 cm
Ambient light: Has good lighting and enough light for vision
Wifi: Requires network access
Height and weight range of people to use the scanner
Weight: between 10 to 200 kg
Height: between 100 to 200 cm
3D scanning compared to other measuring instruments
| Measure Tape | Clipper | DXA scan | Body Impedance (BIA) | Anea body scanner 3D | |
|---|---|---|---|---|---|
| Accuracy | ▼ | ▼ | ▲ | ▲ | ▲ |
| Reproducibility | ▼ | ▼ | ▲ | ▲ | ▲ |
| non-aggressive | ▲ | ▲ | ▼ | ▲ | ▲ |
| No dependence on body contact | ▼ | ▼ | ▲ | ▼ | ▲ |
| No dependence on the environment | ▼ | ▼ | ▲ | ▼ | ▲ |
