Anea body scanner 3D | Anea 3D
Fully automatic non-invasive body scanner.
What hardware does Anea scanner consist of?
The sensor tower is made of a body made of ABS, has a high-resolution 3D camera that is used to photograph the body in the form of three. The sensor tower weighs approximately 5 kg and is 118.5 cm high. The sensor used in the tower is Microsoft Kinect v2.0, which provides an accuracy of 5 mm for our measurements. At the top of the tower is a colored headlight ring that notifies you of various system states.
- Sensor tower
- (white ABS, light weight and high stability)
- Head width: 13.5 cm
- Bottom width: 27 cm
- Height: 120 cm
The scanning platform rotates the body as it collects information so that the sensor can see the body from all angles. The scanning platform communicates with the tower and the computer via wireless connection (WIFI). The platform weighs approximately 17 kg and is 16 cm high. It has 6 Load Cell bases installed under the platform and provides an accuracy of 25 grams for weighing. The rotation speed of the platform is 1 rpm in 40 seconds
- (white coated extruded aluminum, high pressure resistance)
- Height: 12cm
- Width: 64cm
- Length: 64 cm
What technologies are used in Anea scanner?
How is 3D scanning performed?
It only takes 40 seconds to stand on a scanning platform to capture about 700 depth images from all directions of the body, the aggregation of these images forms a three-dimensional 360-degree model of the body. This three-dimensional model is then analyzed using image processing algorithms and the body condition report will be visible.
Perfect space to launch Anea scanner
3D scanning compared to other measuring instruments
|Measure Tape||Clipper||DXA scan||Body Impedance (BIA)||Anea body scanner 3D|
|No dependence on body contact||▼||▼||▲||▼||▲|
|No dependence on the environment||▼||▼||▲||▼||▲|
Anea 3D Scanner
Anea 3D Scanner provides an accurate 3D model of your body and its changes. It can also measure body composition, health indexes, body shape, and health status using advanced image processing technology.
Ways to contact us
Address: No. 8, Bazmeh (Moeini) Alley, North Jamalzadeh, North Azadi St., Enghelab Square, Tehran
+98 (21) 67 386 000